0

Out of 0 Ratings

Owner's of the Canon Camera Accessories 2478A002 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 19
 
Wireless Multi
-
Flash
E-'lTL
Autoflash Operation
(1)
Setting the Slave
ID
With the wireless control of multi
-
ple slaves, you can set the flash
ratio and specify the main flash
and fill flash by assigning a slave
ID. There are three
IDS:
A,
B,
and
C.
The
ST-E2
can control slaves
A
and
B.
When the flash ratio con
-
trol lamp is lit, the
C
slave does
not fire.
Set the slave
ID
to A for the slave on
the left of the camera. and to
B
for
the slave on
the right of the camera.
Press the slave's
<
SEL/SET
>
button to select
<
>
.
2
Press the
<
+
>
or
<
-
>
but
-
ton to set the slave ID to
<A>.
3
Press the
<
SELISET
>
button
to register the slave ID. (The
slave
ID
stops blinking and
stays on.)
4
Follow the same procedure for
the other slave to set the slave
ID to
<B>.
0
If
the slave's
ID
is set to
C,
it
cannot he controlled
by
thc
ST-
E2.
Be sure to set the slave
ID
7rn5s
to
A
or
B.
There is no limit as to the
number of slaves that can be
used. Set the slave
ID
for all
the slaves to either
A
or
B.
About Slave Group
Control
All slaves set to the same ID are
controlled as one group.
Shown below
is
a group of three
slaves whose
ID
is A. They will be
controlled as
a
single slave group A.
COPY