0
Owner's of the Canon Camera Lens 2514A002 gave it a score of 0 out of 5. Here's how the scores stacked up:
CT1-7513-013 © CANON INC. 1996 2008.5
3. Hood (Sold Separately)
The ES-62 lens hood can keep unwanted light out of the
lens, and also protects the lens from rain, snow, and dust.
The supplied hood adapter is required when mounting the
ES-62 lens hood.
1) Screw the hood adapter onto the filter mounting thread
of the lens.
2) Attach the hood to the hood adapter
.
The hood can be reverse-mounted on the lens for storage.
4. Filters (Sold Separately)
You can attach filters to the filter mounting thread on the
front of the lens.
• Only one filter may be attached.
• When using the hood, screw the filter onto the hood
adapter.
• Use a polarizing Canon filter (52mm).
Specifications
Angle of
View
Diagonal 46°
Vertical 27°
Horizontal 40°
Lens Construction 5 groups, 6 elements
Minimum Aperture f/22
Min. Focusing Distance 0.45 m/1.5 ft.
Max. Magnification and
Field of View
0.15×/160 × 240 mm/6.3 ×
9.4 inch (at 0.45 m/1.5 ft.)
Filter Diameter/Usable
Number
52 mm/1
Max. Diameter and Length
68.2 × 41 mm
2.7 × 1.6 inch
Weight 130 g/4.6 oz
Hood
ES-62 (with hood adapter:
sold separately)
Case LP1014 (sold separately)
Q
The lens length is measured from the mount surface to
the front end of the lens. Add 21.5 mm when including
the lens cap and dust cap.
Q
The size and weight listed are for the lens only, except as
indicated.
Q
Aperture settings are specified on the camera.
Q
All data listed is measured according to Canon
standards.
Q
Product specifications and appearance are subject to
change without notice.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Do not make any changes or modifications to the equipment
unless otherwise specified in the instructions. If such changes
or modifications should be made, you could be required to stop
operation of the equipment.
This equipment has been tested and found to comply with the
limits for a class B digital device, pursuant to part 15 of the FCC
Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for
help.
This Class B digital apparatus complies with Canadian ICES-003.
COPY
Find Your Products By Category
Please Login
