0

Out of 0 Ratings

Owner's of the Canon Camera Lens 4657A006 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 14
 
ENG-7
6. About Exposure
Setting the Exposure
When taking photographs using TTL metering,
no exposure compensation is necessary to meter
the light coming through the lens.
With TTL metering, AE (autoexposure) is
possible at all focusing distances. Just set the
desired picture-taking mode, then check the
shutter speed and aperture before taking the
picture.
Magnification and Effective f-
number
The aperture displayed by the camera assumes
that the focus is set to infinity.The actual
aperture (effective f-number) becomes darker
(effective f-number increases) at closer focusing
distances (magnification increases).This does
not cause exposure problems for normal picture-
taking. However, for closeup photography, you
cannot ignore the change in the effective f-
number.
The correct exposure for a close-up shot largely
depends on the subject.Therefore, try to bracket
the exposure for the same subject.
Using aperture-priority AE (Av) or Manual (M)
picture-taking modes are recommended for
macro photography as it is easy to adjust depth
of field and exposure in these modes.
If your eye will not be covering the eyepiece when
the picture is taken (with remote control operation,
etc.), use the eyepiece shutter or eyepiece cover.
This prevents stray light from entering the
eyepiece and throwing off the proper exposure.
Magnification 1 : 5 1 : 3 1 : 2 1 : 1.5 1 : 1
Effective f/No. 3.6 4.1 4.6 5.0 5.9
Exposure Factor + +1 +1 +1 +2
(stops)* + +1 +1 +2
1
2
1
2
2
3
1
3
2
3
* Upper values:1/3 stops.Lower values:1/2 stops.
When you use a handheld exposure meter to set
the exposure, you must take into account the
exposure factor shown in the following table.
COPY