Olympus Camera Lens V207010BU000 User Manual

0

Out of 0 Ratings

Owner's of the Olympus Camera Lens V207010BU000 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 8
 
It took me little time to get used to. This works very well because ISO and WB are settings I change a lot
less often other settings, so although not as nice as some other pro cameras with dedicated individual
buttons - this is very functional. I do need to get in the habit of moving the lever back to position 1 after
making an ISO or WB changes so that the dials return to the defaults I expect them to be at.
However, the choices for the "Lever" also effect the HDR and AF/Metering buttons of the top left side of
the camera! And you can make changes to how the "Lever" effects changes making the camera even
more customizable (complicated?).
The HDR and AF/Metering buttons on the
top left side of the camera are multi-
functional themselves.
HDR and Bracketing
When the "Lever" is set in position 1 and
with a press the HDR button:
the front dial changes between in-
camera HDR photos, 3-frames 2.0
EV, 5-frames 2.0 EV, 7-frames 2.0
EV, 3-frames 3.0 EV, 5-frames 3.0 EV bracketing modes, and also turns on High Speed Sequential
shooting
the rear dial changes from single image, high speed sequential, low speed sequential, or set the
self-timer for 12 seconds, two seconds, or set a time interval and the number of photos to be
taken with the rear dial.
When the "Lever" is set in position 2 and a press the HDR button:
the front dial changes Auto Exposure (AE BKT), White Balance (WB BKT), Flash Level (FL BKT),
ISO (ISO BKT), or ART (ART BKT) bracketing.
the rear dial changes and turns off/on bracketing and changes between 2 - 7 frames with 0.3
EV, 0.7 EV, or 1.0 EV changes between frames (except 7 frames only goes up to .7EV).
Auto Focus and Metering modes
When the "Lever" is set in position 1 and with a press the AF button:
the front dial changes between ESP, Center-Weighted, Spot, Spot Hilight, and Spot Shadow
metering modes.
the rear dial changes between S-AF (Single Auto Focus, locks focus once,), C-AF (continuously
focus until the focus button is released), Manual Foucs, S-AF MF (locks focus and allows manual
focus fine tuning), and C-AF TR (consciously focus and tracks subject)

   Find Your Products By Category